Step 6 - Door Reversal (Optional) - Haier HLTD600AEW Manual Para El Usuario

STEP 6 - DOOR REVERSAL (OPTIONAL)

Your dryer door is built to open from (left to right). Use the following instructions to
reverse the direction of the door swing so that it opens from (right to left).
NOTE: Different screw types are used for the door and cabinet. The flat-head
screws are used for the door hinges.
1. Unplug the power cord.
2. Remove the four screws attaching each hinge to the door and cabinet.
NOTE: Be sure to support the dryer door when removing the screws.
3. Set the dryer door aside. Remove the screws for the lock cover on the right-
hand side of the dryer cabinet, and remove the screws for the lock on the left-
hand side of the dryer cabinet.
4. Move the lock to the right-hand side of the cabinet, and
move the lock cover onto the left-hand side of the cabinet,
and then reinstall both with the screws removed earlier.
5. Remove the screws attaching the inner door board to the
outer door board.
6. Remove the inner door board from the outer door board.
7. Turn the inner door board 180°, and then replace the
inner door board inside the outer door board.
8. Using the screws removed in Step 5, fasten the inner
door board to the outer door board.
9. With the screws removed in Step 2, attach the dryer
door to the dryer cabinet.
10. With the handle on the right hand side, fasten the dryer
door to the hinges.
22
c
a
b
a
Cabinet Screws
b
Locker Cover
c
Door Screws
a
a
Lock
a
b
a
Outside Door
Board
b
Inner Door Board