First-time Operation
1
2
3
A
B
12
1
Inserting the Battery Pack.
Turn over the computer and insert the battery pack until it touch to the secured position.
l Make sure no foreign objects are under the computer.
CAUTION
l Make sure the latch is securely locked. Otherwise the battery pack may fall when you carry
the computer.
l Do not touch the terminals of the battery pack and the computer. Doing so can make the ter-
minals dirty or damaged, and may cause malfunction of the battery pack and the computer.
2
Connect your computer to a power outlet.
The battery charging starts automatically.
CAUTION
l Do not disconnect the AC adaptor until the first-time operation procedure is completed.
l When using the computer for the first time, do not connect any peripheral device (including
wired LAN cable) except the battery pack and AC adaptor.
Handling the AC adaptor
l
Problems such as sudden voltage drops may arise during periods of thunder and lightning.
Since this could adversely affect your computer, an uninterruptible power source (UPS) is
highly recommended unless running from the battery pack alone.
3
Turn on the computer.
Press the power switch
CAUTION
Do not press the power switch repeatedly or do not hold the power switch for four seconds
l
or longer.
Any changes from the default setting of the Setup Utility must not be made until the First-
l
time Operation is completed.
4
<For MUI OS model>
Select language.
A Select language on "Your display language" and touch [Next].
Follow the on-screen instructions.
(A) until the power indicator
(B) lights.