Testboy TV 350 Manual De Instrucciones página 19

Description of the buttons
Switching the measuring instrument on and off
Switching the backlighting on and off and USB transfer.
/USB
HOLD/MODE To determine the measured value and the temperature mode.
FUNC To switch between functions of wind speed measurement, surface area setting
and air flow measurement. Hold depressed for three seconds to activate or de-
activate the "Auto Power-Off" function (automatic deactivation).
MAX/MIN Switch between maximum-minimum-normal mode; hold depressed to leave.
UNIT Switching the unit, surface (m², ft²), hold depressed to switch between (°C, °F)
windspeed (m/s, km/h, mil/h, ft/m, ft/s, knots), air flow volume (CMS, CMM, CFM).
Explanation of the display
Shows the automatically switched-off state
H Measured value
VEL Wind speed measurement
FLOW Air volume flow measurement
AREA Surface area required to measure the air flow volume
DP Indicates that the device is in the mode for measuring the dew-point.
WB Indicates that the device is in the mode for measuring the wet-bulb temperature.
°C, °F Temperature unit
%RL Relative humidity
USB Indicates that real-time data transfer via USB has been activated.
MAX Displays the maximum with selection of the maximum-minimum value operation.
MIN Displays the minimum with selection of the maximum-minimum value operation.
m² Indicates that the current surface area setting is square metres.
ft² Indicates that the current surface area setting is square feet.
CMM Cubic metres per minute
CMS Cubic metres per second
CFM Cubic feet per minute
Knots Nautical miles per hour, 1850 metres per hour
ft/s Feet per second
ft/m Feet per minute
m/s Metres per second
Km/h Kilometres per hour
mil/h Nautical miles per hour
Indicator for low battery voltage
®
Testboy TV 350
Operation
19