To Start The Product; To Stop The Product; Automatic Shutdown Function; Functional Behaviour - Husqvarna 340iBT Manual Del Usuario

2. Push the battery into the battery holder of the
backpack. The battery locks into position when you
hear a click.
CAUTION:
move easily into the battery holder, the
battery is not installed correctly. This
can cause damage to the product.
3. Make sure that the battery is installed correctly.

To start the product

1. Push the power lever to the start position.
2. Use the power trigger to control the speed.

To stop the product

1. Release the power trigger.
2. Push the power lever to the stop position.
1166 - 007 - 30.06.2020
If the battery does not
3. Push the release buttons on the battery and
remove the battery from the product.

Automatic shutdown function

The product has an automatic shutdown function that
stops the product if it is not used. The product shuts
down after 30 minutes.

Functional behaviour

The product can be used with one battery in any of the
pockets or with two batteries. If two batteries are
installed the product will start to use the battery in the
lower pocket before switching to the upper battery.
Under normal condition the product will switch to the
second battery when the first one is out of power.
Under special circumstances the product will switch
several times to cool the batteries.
If BLi10 or BLi100 is used in the product, the rpm will
be limited to protect the batteries.
To prevent overheating of the batteries when battery
switching is not possible, the product will lower the rpm
to ensure full runtime.

To operate the cruise control function

1. Push the power trigger to select the optimal airflow
for your work.
11