Ultimaker S5 Air Manager Guia De Inicio Rapido página 4

Install the Air Manager
Turn off your Ultimaker S5 before installing the Air Manager.
1. Align the mounting
bracket with the back of
the Ultimaker S5
4. Align the bottom of the
filter housing with the
slots in the mounting
bracket and push
into place
2. Guide the Bowden
tubes and print
head cable into both
mounting bracket slots.
(Bowden tubes should
be placed at the front.)
5. Gently push the filter
completely into the
filter housing
3. Gently push down on
the mounting bracket
until it clicks firmly
into place
6. From the front of the
printer, place the cover
over the filter housing