Operation - J.P. SELECTA CENTRO-4 BL Manual De Instrucciones

Centrifugas de control electronico-digital y motor de inducción
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

MANUAL DE INSTRUCCIONES CODIGO 80222 REV A NOV-2007
2
1
3
4
5
6
J
.P. SELECTA s.a.

8 Operation

7
9
STARTING UP
- Connect the equipment to the power supply
- Turn on the main switch (12). The displays (1) and (2) will light.
- Press key (8) to open the lid
- Insert the tube in the rotor in balanced campensate way.
If onlu use 2 tube insert them in oposite sides of the rotor(not
contiguous)
8
10
Never place one or three tube. Always two or four.
- Close the lid pressing on it untill heard the sound of the lock.
- Pressing the keys (3) and (4) increases or decreases the speed set
which is shown on the display (1).
- Pressing the keys (5) and (6) increases or decreases the set time
which is shown on the display (2).
WORKING FOR A NOT DEFINED TIME
When the display (2) shows «00» by pressing the key (6) the display
shows: «--». If the centrifuge starts whit this set time it only will
stop manually.
- Stat pressing the key (7). The centrifuge will stop once finished the
set time.
During the working the display (1) shows the speed read by the
tachometer.
The work can be stop pressing the key (10).
INSTANT START/STOP
- Do the previous operation as is explained on the section «Starting
up». Once the speed and time of the working are set and diferent of
0, by pressing the key (7) the rotor starts to turn at the speed set. By
stop pressing the centrifuge will stop.
EMERGENCY OPENING
In case of a cut of the power supply and it would be necessary opening
the door, do the following:
- Remove the plastic stopper on the right lateral of tue aparatus.
- Pull carefully from this sttoper and the lid will open.
Do not use this emergency opening device when
the machine is working.
Do not use the centrifuge:
If the speed showed on the screen does not stabilize never.
(In this case the real speed could be diferent that the showed
by the screen)
Contact with the technical service of J.P. Selecta, S.A.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta @jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso)
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 16

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7002560

Tabla de contenido