MANUAL DE INSTRUCCIONES
CAUTION!!! IMPORTANT FOR YOUR SAFETY!
J
.P. SELECTA s.a.u.
CODIGO 80052 REV E
INSTALLATION
Place the cooling plate on a flat horizontal, level surface, leaving a space
at the back and sides of the apparatus of about 10cm.
Do NOT use the plate for thermic treatment of products which made
form explosive gases, not even in special protection aerea.
Be sure that the voltage supply is the same as the one indicated
on the characteristics plate.
Do not use the apparatus if it is NOT earthed.
If you have to change the plug bear in mind the following:
Blue cable: Neutral.
Brown cable: Phase.
Yellow/green cable: Earth.
OPERATION
CONTROL PANEL:
1. Main switch with indicator lamp.
2. Compressor operation indicator lamp.
3. Temperature controller.
1
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es http://www.grupo-selecta.com
3
Tel (34) 93 770 08 77 Fax (34) 93 770 23 62
03/2021
Pag.: 10
2