Hilti SCM 22-A Manual Del Usuario página 24

▶ Do not attempt to brake the product by applying lateral pressure to the saw blade.
▶ Do not touch the clamping flange or the clamping screw while the power tool is running.
▶ Never press the drive spindle lock button while the saw blade is rotating.
▶ Never direct the power tool toward persons.
▶ Adjust the pressure applied to the saw blade and the material being cut so that the blade does not
stall, possibly causing kickback.
▶ Metal chips / cuttings are sharp and may cause injury. Keep your clothing closed so that no metal
chips or cuttings can find their way into your gloves, footwear or any other part of your clothing.
▶ Pay attention to where the metal cuttings are flying. The cuttings are hot and could cause a fire or
injuries such as burns or cuts.
▶ Avoid overheating the tips of the saw blade teeth.
▶ Observe the national health and safety requirements.
▶ To reduce the risk of injury, use only genuine Hilti accessories and accessory tools.
▶ Dust from materials, such as paint containing lead, some wood species, concrete / masonry / stone
containing silica, and minerals as well as metal, may be harmful. Contact with or inhalation of the dust
may cause allergic reactions and/or respiratory or other diseases to the operator or bystanders. Certain
kinds of dust are classified as carcinogenic such as oak and beech dust, especially in conjunction with
additives for wood conditioning (chromate, wood preservative). Material containing asbestos may be
handled only by specialists. Use a dust removal system whenever possible. To achieve a high level
of dust collection, use a suitable vacuum cleaner. When indicated, wear a respirator appropriate
for the type of dust generated. Ensure that the workplace is well ventilated. Follow national
requirements for the materials you want to work with.
Electrical safety
▶ Before beginning work, check the working area (e.g. using a metal detector) to ensure that no
concealed electric cables or gas and water pipes are present. External metal parts of the power tool
may become live, for example, when an electric cable is damaged accidentally. This presents a serious
risk of electric shock.
Careful handling and use of batteries
▶ Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
▶ Do not expose batteries to high temperatures and keep them away from fire. There is a risk of
explosion.
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over
80°C (176°F). This presents a risk of fire, explosion or injury through contact with caustic substances.
▶ Never continue to use or attempt to charge damaged batteries, e.g. batteries with cracks, broken
parts, bent or pushed-in / pulled-out contacts).
▶ Do not use the battery as a power source for other unspecified power tools or appliances.
▶ If the battery is too hot to hold, it may be defective.In this case, place the power tool in a non-
flammable location, well away from flammable materials, where it can be kept under observation
and allowed to cool down. Contact HiltiService after the battery has cooled down.
3 Description
3.1 Overview of the product
Auxiliary grip
@
Switch-on interlock release button
;
On/off switch
=
Grip
%
Charge state and fault display
&
Battery release button
(
Chip collector
)
Pivoting guard operating lever
+
Drive spindle
§
Base plate
/
Pivoting guard
:
Rip fence (parallel guide)
∙
18
1
Saw blade position indicator
$
LED / viewing window
£
Guard
|
Drive spindle lockbutton
¡
Cutting line indicator
Q
Parallel guide (rip fence) clamp
W
Battery
E
Clamping lever for cutting depth adjust-
R
ment
Hex. socket wrench
T
Mounting flange
Z
Clamping flange
U
Clamping screw
I