Units Menu; Target Menu - Bahco TEA003 Instrucciones Originales

TEA003 / TEA010 / TEA030 / TEA065 / TEA350 / TEA1100 / TEA2100

4.2 Units Menu

NOTE: Units which can be enabled are model specific (See Technical Specification).
4.3 Click Menu
Setting Options
Sensitivity: High / Medium / Low
Reset: Auto / Manual
Hold Time: 1 sec / 2 sec / 3 sec

4.4 Target Menu

Setting Options
# (Target No.): 01 – 15
Units: N·m / lbf·ft / etc
Value: 0 or 2 - 100% Capacity
(e.g. 7.0 – 350.0)
±% (Tolerance): 1 – 15%
Select units to enable/disable
Toggle enable/disable (
Select and press
Cancel (exit without saving changes)
Select menu item (e.g. Sensitivity)
Confirm item
Change setting (e.g. High to Medium)
Confirm setting
Select and press
Cancel (exit without saving changes)
Select menu item (e.g. Units)
Confirm item
Change setting (e.g. N·m to lbf·ft)
Confirm setting
Select and press
Cancel (exit without saving changes)
• When changing the target value, you can
press and hold the buttons to speed up the
change
• When you change the target units, the target
value will change to suit
• Setting the target value to '0' disables it,
meaning it won't be selectable in the measure
screen
ü 
or )
to save and exit
to save and exit
to save and exit