Setup
•
Setting flow: Set 12/24H format—hour—minute— year— month—day—DT on/off
(Dimmer Timer)—Update on/off—Snooze (1-60 minutes)
•
Make the middle knob "Alarm off / AL1 / AL1+2 / AL2" (3) point to "Alarm Off",
•
Press and hold "Setup" (4) to begin the setting.
•
Turn right rotary knob "Set" (2) to choose the 12 or 24 H display format.
•
Press "Setup" (4) to confirm and enter clock setting
•
Turn right rotary knob "Set" (2) to set the hour.
•
Press "Setup" (4) to confirm and turn right rotary knob "Set" (2) to set the minute.
•
Press "Setup" (4) to confirm and turn right rotary knob "Set" (2) to set the year.
•
Press "Setup" (4) to confirm and turn right rotary knob "Set" (2) to set the month.
•
Press "Setup" (4) to confirm and turn right rotary knob "Set" (2) to set the day.
•
Press "Setup" (4) to confirm the setting and enter the Dimmer Timer on/off setting.
•
Turn right rotary knob "Set" (2) to set DT to be on or off.
•
Press "Setup" (4) to confirm and enter Time - Update on/off setting.
•
Turn right rotary knob "Set" (2) to set Update to be on or off. When time update is
set to on, time update will be done by RDS time sync at 2 and 3o' clock
automatically every day.
•
Press "Setup" (4) to confirm and enter Snooze setting.
•
Turn right rotary knob "Setup" (2) to set the "Snooze" time (1 - 60 minutes)
•
Press "Setup" (4) to confirm and exit the setting.
Technische Änderungen und Druckfehler vorbehalten
Copyright by Woerlein GmbH, Gewerbestraße 12, D-90556 Cadolzburg,
www.soundmaster.de
Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH
SETUP DEVICE FOR ADVANCE
4
FUR5005 / English Instruction Manual