Appendix A: Velocity Profiling; Appendix B: Flow Calculations; Replacement Parts And Accessories - Hach Flo-Tote 3 Manual Básico Del Usuario

Ocultar thumbs Ver también para Flo-Tote 3:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
Troubleshooting
Refer to the expanded user manual on the manufacturer's website (http://www.hachflow.com) for
troubleshooting information.

Appendix A: Velocity profiling

Profiling a site involves directly measuring the water velocity at several points across the pipe cross-
section to determine the average velocity. The flow logger uses this profile information along with the
sensed velocity and depth reported by the flow sensor to calculate the correct site calibration
coefficient for the application.
Note: Profiling verifies or improves accuracy. However, the default site calibration coefficient is often adequate.
Refer to the expanded user manual on the manufacturer's website (http://www.hachflow.com) for
velocity profiling information.

Appendix B: Flow calculations

For most applications, the flow in a channel is calculated and recorded by a flow meter.
Refer to the expanded user manual on the manufacturer's website (http://www.hachflow.com) to
calculate the flow manually or to understand how flow is calculated.

Replacement parts and accessories

Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Replacement parts
Description
Desiccant beads, bulk, 1.5 pound canister
Desiccant container
Hydrophobic membrane
O-ring, dessicant container end cap, 1.176 ID x 0.070 OD
Accessories
Description
Scissor band for ∅ 15.24 cm (6 in.) pipe
Scissor band for ∅ 20.32 cm (8 in.) pipe
Scissor band for ∅ 25.40 cm (10 in.) pipe
Scissor band for ∅ 30.48 cm (12 in.) pipe
Scissor band for ∅ 38.10 cm (15 in.) pipe
Scissor band for ∅ 45.72 cm (18 in.) pipe
Scissors-jack band, 10 in. wide x 18 in. base
Scissors-jack band, 10 in. wide x 36 in. base
16 English
W A R N I N G
Item no.
8755500
8542000
3390
5252
Item no.
800008105
800008106
800008107
800008108
800008109
800008110
800008101
800008102

Publicidad

Tabla de contenido
loading

Tabla de contenido