Publicidad
Idiomas disponibles
Idiomas disponibles
Using the teleloop
5
Switch the receiver on and set your
hearing aid to inductive reception.
Now you can adjust the volume by
turning the knob to any position between
1 and 5 (Fig.: Volume control).
- 1 means lowest volume
- 5 means highest volume
Using the 3.5 mm stereo output jack
6
The following accessories can be connected to the 3.5 mm stereo jack:
- Under-the-chin receiver, open system
- Under-the-chin receiver, closed system
- Earphone, inconspicuous design
- Lightweight headphones, conventional design
- Induction plate: monaural
- Induction plate: binaural
- Monaural Euro cable, damped
- Binaural Euro cable, damped
As soon as you no longer need to use the product, make sure to unplug
any accessory you may have connected to the 3.5 mm stereo jack and flip
the switch on the back of the receiver to "OFF".
Volume control
English 15
Publicidad
