DeWalt DXCMWA5591056 Manual De Instrucciones página 10

WARNING: RISK OF INJURY OR PROP ER TY DAMAGE WHEN
TRANSPORTING OR STORING
WHAT CAN HAPPEN
• Oil can leak or spill and
could result in fire or
breathing hazard; serious
injury or death can result. Oil
leaks will damage carpet,
paint or other surfaces in
vehicles or trailers.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
HOW TO PREVENT IT
• Always place compressor
on a protective mat when
transporting to protect against
damage to vehicle from leaks.
Remove compressor from
vehicle immediately upon
arrival at your destination.
Always keep compressor level
and never lie on its side.
FEATURES
UNLOADER VALVE
When the maximum air tank pressure is obtained, the unloader
valve (H) will blow-off. This will cause the compressor to
exhaust the air to the atmosphere and not the tank. The valve is
preset by the manu facturer and must not be removed or modified
in any way.
Manual Lock: The manual lock allows you to manually unload the
compressor with air pressure in the air tank. To operate the manual
lock:
Rotate the manual lock unloader lever to the
open position to prevent air tank pressure
buildup. Rotate manual lock unloader lever
to the closed position after starting the
engine to allow air tank pressure to build.
NOTE: Air will not build in tank when manual
lock unloader lever in the open position.
AIR INTAKE FILTER
The filter (A) is designed to clean air entering the
pump. To ensure the pump continually receives a
clean, cool, and dry air supply the filter must always
be clean and the filter intake must be free from
obstructions.
AIR TANK DRAIN VALVES
The drain valve (J) is used to remove
moisture from the air tank after the air
compressor is shut off.
10
H
H
OPEN
CLOSED
A
J