Switch The Phone On And Off; Set The Time, Time Zone, And Date; Plug And Play Service - Nokia 8600 Luna Guia Del Usuario

Ocultar thumbs Ver también para 8600 Luna:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Charge the battery with the CA-101 data cable
The CA-101 data cable, included in the
sales package, is used for data transfer and
slow charging the battery while connected
to a PC or laptop.
See "USB data cable," p. 55 for more
information. You must download Nokia PC
Suite 6.83 to use with your device. Updated
versions can be added after version 6.83.
Go to www.nokia.com/support for
more information.
1. Connect the lead from the CA-101 to
the micro USB socket on the lower right side of your phone.
2. Connect the CA-101 to your PC or laptop. USB data cable connected. Select mode.
appears on the display screen of your phone.
3. Select OK and Default mode.
The AC-6 charges the battery much faster than the CA-101. Charging with the AC-6 is
recommended when short charging times are needed.

■ Switch the phone on and off

Warning: Do not switch the phone on when
wireless phone use is prohibited or when it
may cause interference or danger.
To switch the phone on or off, press and hold the
power key.
If the phone asks for a PIN or a UPIN code, enter the
code (displayed as ****), and select OK.

Set the time, time zone, and date

Enter the local time, select the time zone of your location in terms of the time difference
with respect to Greenwich Mean Time (GMT), and enter the date. See "Time and date," p. 51.

Plug and play service

When you switch on your phone for the first time, and the phone is in the standby mode,
you are asked to get the configuration settings from your service provider (network service).
Confirm or decline the query. See "Connect to serv. support," p. 57, and "Configuration
settings service," p. 9.
13

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido