Cleaning And Maintenance; Troubleshooting - cecotec JUICE&LIVE 1500 PRO Manual De Instrucciones

ENGLISH
Fig. 11
3. Clean the food before juicing it. Make sure to cut the food into pieces not larger than 3 cm for
optimal extraction, and remove any large hard seeds. Place the foodstuffs into the inlet mouth.
Do not push with force, the pusher provided is only to be used when food is blocked.

5. CLEANING AND MAINTENANCE

1. Turn off the device and unplug it.
Fig. 12
2. Turn the press counterclockwise and lift it to detach it from the main body. Once detached,
remove the juicer from the appliance.
Fig. 13
3. Remove the filter and the sieve. Turn the silicone piece and remove it. Remember to attach
the silicone piece back once you have cleaned the appliance.
4. Use the brush to clean the product and its components after use.
5. Do not use a metal scourer or abrasive detergents to clean the appliance.
6. Do not immerse the base in water. Use a wet or dry cloth to clean it.
7. Dry thoroughly all parts after cleaning.
8. All parts of the device, except for the motor base, are dishwasher safe.

6. TROUBLESHOOTING

Problems
1. Leaking under the bowl.
2. Strainer damaged.
3. Motor is stuck or has stopped.
4. Water mark or scratch on the squeezer.
5. Bowl stuck and does not detach from the base.
6. The device vibrates.
7. Squeaking noise when juicing.
8. The lid is stuck.
Possible causes
1. Stoppers not plugged in correctly.
2. Ice, frozen food, large hard seeds or pits or excess of food in bowl.
3. Excess of food in the bowl. Safety system: automatic shut off due to overheating.
4. Moulding marks during the manufacturing process.
15
JUICE&LIVE 1500 PRO