Troubleshooting; Cleaning And Maintenance - cecotec A1gnRmsA6uS Manual De Instrucciones

Licuadora de prensa fría
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
ENGLISH

4. TROUBLESHOOTING

Problem
Leaking from under
the bowl
Strainer damage
Motor is stuck or
has stopped
Water mark or
scratch on the
squeezer
Bowl stuck and
does not detach
from the base
The unit vibrates
Squeaking noise
when juicing
Hopper/lid is stuck

5. CLEANING AND MAINTENANCE

1. Turn off the power and unplug the appliance.
2. Turn the press counterclockwise and lift it to detach it from the main body. Once detached,
remove the juicer from the appliance.
3. Turn the silicone piece and remove it. Remember to attach the silicone piece back, once you
have cleaned the appliance.
4. Use a brush to clean the parts after use.
5. Do not use a metal scourer or abrasive detergents to clean the appliance. Do not clean in the
dishwasher. Otherwise, the appliance could get damaged.
6. Do not immerse the base in water. Use a wet or dry cloth to clean it.
7. Please, dry all parts after cleaning.
Cecojuicer Compact
10
Possible cause
Stoppers not plugged in correctly.
Ice, frozen foods, large hard seeds
or pits, unknown substances, or
excess of food in the bowl.
Excess of food in the bowl. Safety
system: automatic shut off due to
overheating.
Molding marks during the
manufacturing process.
Excess of food in the bowl.
Unknown substance in the bowl.
Sign of motor working properly.
Friction between the squeezer and
bowl or food.
Excess of food in the bowl.
Unknown substance in the bowl.
Solution
Be sure to plug in the stopper tightly after
cleaning.
Refer to the instruction manual for proper
usage and juicing tips. Remember not to
overfill food or force food into the juicer.
Press the reverse button for 3-5 seconds.
Repeat the process 2-3 times. If the motor
has stopped, let it cool down before trying
again.
These marks and lines on the squeezer are
perfectly normal.
Press the reverse button for 3-5 seconds.
Repeat the process 2-3 times. Then, pull
from the bowl upwards while turning it.
Vibration is perfectly normal. However, the
appliance shakes severely, which causes
imbalance of the unit, it should be checked
for a defective screw.
Squeaking sounds are perfectly normal. Do
not run the juicer without food.
Press the reverse button for 3-5 seconds.
Repeat the process 2-3 times. Then, press
down on top of the lid while turning it.

Publicidad

Tabla de contenido
loading

Tabla de contenido