Release And Lock Measuring Head; Factory Settings - X-Rite DensiEye Guía De Introducción Rápido

Qui c k Start Gui d e
E N G L I S H

5. Release and lock measuring head

Release measuring head
• Release the measuring head by pushing back the locking button on the left-hand side of the measuring head
• When the device is opened for the first time, the main menu will be displayed with the last display selected as a reference
• The display is switched off after approx. 30 seconds
• The DensiEye can be switched back on by pressing any button
Lock measuring head
• Fold up the DensiEye and push forward the locking button on the left-hand side of the measuring head
• The display goes out after approx. 30 seconds
6.

Factory settings

• Absolute / Difference:
• White base:
• Reference set:
• Filter/colour selection:
• Pass/Fail:
• Scaling graduation:
• Number of decimal places:
• Language:
• Left/right-handed operation:
6
Absolute
Paper
1st reference set
Auto
Off
10%
2
English
Right-handed operation
®
X-Rite DensiEye ™ Quick Start Guide