Functional Description; Safety Equipment; Technical Specifications - Deltafox DG-PLM 4019 P Traducción Del Manual De Instrucciones Original

35 Bowden cable locking nut
36 Bowden cable adjusting nut

Functional Description

The equipment is driven by a powerful
four-stroke engine (RATO RV125-S).
The device is equipped with a robust plas-
tic housing, a grass collection box and a
foldable grip handle
Refer to the following descriptions for a
functional description of the controls.

Safety Equipment

2 Safety catch
The equipment stops when the
safety catch is released.
14 Exhaust guard
prevents hands or combustible
materials from coming into con-
tact with a hot exhaust.
22 Rear and side impact protec-
tion
protect the operator from parts
that are flung out and from ac-
cidentally touching the blades
when mowing with no grass col-
lection box.

Technical Specifications

Petrol lawnmower .............DG-PLM 4019
PEngine ............................RATO RV125-S
Engine size ......................... 127,1 cm
Power input.................... 1.9 kW (2.58 PS)
Blade rotation speed (n
Blade torque .......................... max. 45 Nm
Petrol tank volume .............................. 0.8 l
Octane rating ....................................95-98
Engine oil tank volume ................... 300 ml
Motoroil ..................HD SAE 30 or 10W-30
Spark plug .......................... RISO: F5RTC
........................................ TORCH: F5RTC
(cc)
3
) . max. 2900 min
0
Cutting circle .............................
Cutting height .........3-stage, 25/45/65 mm
Grass collection box volume................ 40 l
Weight ..............................................16 kg
Sound pressure level
(L ) ..................... 74.3 dB(A); K
pA
Sound power level (L
measured ....... 94.3 dB(A); K
guaranteed ...............................96 dB(A)
Vibration at the handle
(a ) ....................... 4.99 m/s
h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
-1
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
GB
ø
400 mm
= 3 dB
pA
)
WA
=1.84 dB
WA
; K=1.5 m/s
2
77
2