Functional Description; Safety Equipment; Technical Specifications - Deltafox DG-PLM 4219 SP Traducción Del Manual De Instrucciones Original

33 Cut height position
34 Blade
35 Blade bolt
36 Clamping disk
37 Bowden cable locking nut
38 Bowden cable adjusting nut

Functional Description

The equipment is driven by a powerful
four-stroke engine (RATO RV 125-S).
The device is equipped with a high quality
steel plate housing, a grass catcher and a
foldable grip handle.
Refer to the following descriptions for a
functional description of the controls.

Safety Equipment

2 Safety catch
The equipment stops when the safety
catch is released.
13 Exhaust guard
prevents hands or combustible materi-
als from coming into contact with a hot
exhaust.
21 Rear and side impact protection
protect the operator from parts that are
flung out and from accidentally touch-
ing the blades when mowing with no
grass collection box.

Technical Specifications

Petrol lawnmower ........DG-PLM 4219 SP
Engine .............................RATO RV 125-S
Engine size .........................127,1 cm
Power input...................... 1,9 kW (2,6 PS)
Blade rotation speed (n
Blade torque .......................... max. 45 Nm
Petrol tank volume .............................. 0.8 l
Octane rating ....................................95-98
(cc)
3
) .. max. 2900 min
0
Engine oil tank volume ................... 500 ml
Motoroil ..............HD SAE 30 oder 10W-30
Spark plug ...................... TORCH: F5RTC
Cutting circle .............................
Cutting height ..............6-stage, 25-75 mm
Grass collection box volume................ 45 l
Weight ...........................................21.3 kg
Sound pressure level
(L ) ...................... 81,5 dB(A); K
pA
Sound power level (L
measured ..... 94,29 dB(A); K
guaranteed ...............................96 dB(A)
Vibration at the handle
(a ) ....................... 3,813 m/s
h
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
-1
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
GB
ø
420 mm
= 3 dB
pA
)
WA
=1,05 dB
WA
, K=1,5 m/s
2 2
81