Ac Voltage Measurement - Minipa ET-3702A Manual De Instrucciones

C. AC Voltage Measurement
WARNING
To avoid personal injuries or damages to the meter due an electric
shock, please do not attempt to measure voltages higher than 1000V
DC/750V AC.
Set the rotary switch to V ~. Use the RANGE key to manual selection
between the 400mV, 4V, 40V, 400V and 750V ranges.
Note
• If possible, for safety purpose, turn off the power and discharge all ca-
pacitors of the circuit under test before connecting the test leads to the
points to be measured.
Figure 5
33