Maintenance - Gardena ErgoJet 3000 Instrucciones De Empleo

6. Maintenance

WARNING:
before making any adjustments, changing accessories, or performing
maintenance.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
BEFORE EACH USE
Check for loose fasteners
and parts:
Check for damaged or
worn parts:
AFTER EACH USE
Inspect and clean unit
and labels:
Clean collection bag:
9332-20.960.01.indd 25
Stop the unit and disconnect the plug from the power source
Keep all nuts, bolts and screws tight to be sure the product is
in a safe working condition. Be sure all parts are assembled
properly.
• Inlet Cover
• Blower Tube
• Vacuum Tubes
• Collection Bag
Contact your authorized service dealer for replacement of
damaged or worn parts.
• ON/OFF Switch – Ensure switch functions properly by moving
the switch to the OFF position. Make sure motor stops;
then restart motor and continue.
• Inlet Cover – Discontinue use of unit if inlet cover fails to latch
properly or if it is damaged in any way.
• After each use, inspect complete unit for loose or damaged
parts. Clean the unit using a damp cloth.
• Wipe off unit with a clean dry cloth.
IMPORTANT:
THE COLLECTION BAG MUST BE PROPERLY
EMPTIED.
• You must properly empty and maintain the collection bag to
avoid deterioration and obstruction of air flow.
• Remove the collection bag from the unit and empty after each
use. Do not store bag without emptying the bag of all contents
(grass, leaves, etc.).
• Wash the bag once a year. Remove the bag from the blower
and turn the bag inside out. Wash the bag with a water hose.
Allow the bag to hang and dry completely before you reuse
the bag.
25
04.01.12 07:47