Publicidad
Rear Panel
1. DC Input (PSU-2) / Battery Pack Input
Connect either external Blackstar power supply, or the Blackstar Rechargeable
Power Pack here.
NOTE: ONLY USE A BLACKSTAR APPROVED POWER SUPPLY (PSU-2).
2. Battery Compartment
Insert batteries here for portable use. We recommend using rechargeable (NiMH)
or Alkaline batteries in your SUPER FLY Bluetooth to get the most out of using it
on the go.
NOTE: 8 x AA batteries (rechargeable recommended).
3. Cabinet Link (SUPER FLY Active Cab)
Connect your SUPER FLY Bluetooth to a SUPER FLY Active Cabinet using this XLR
output. Always use a good quality screened cable. (Active Cabinet sold separately.)
4. Stereo Mode
This sliding selection switch selects the speaker configuration of both the internal
speakers of the SUPER FLY Bluetooth and the connected SUPER FLY Active Cab,
in either Dual Stereo or Split Stereo modes.
When Dual Stereo is selected, this configuration results in stereo output individually
from both the SUPER FLY Bluetooth and SUPER FLY Active Cab in a L/R (Amp) –
L/R (Cab) arrangement.
When Split Stereo is selected, this configuration results in stereo output across both
the SUPER FLY Bluetooth and SUPER FLY Active Cab in a L/L (Amp) – R/R (Cab)
arrangement. The SUPER FLY Bluetooth will output Left audio only, and the SUPER
FLY Active Cabinet will output Right audio only.
5. Kensington Lock
Also known as a Kensington Security Slot or K-Slot, this is a specifically sized hole
for connecting a compatible Kensington Lock to secure the amplifier to a fixed
point. For more information please refer to www.kensington.com
12
SUPER FLY Active Cabinet
1. MP3 / Line In
Connect the output of your MP3 or CD player here. Adjust the player's volume to
match that of your guitar to enable you to play along.
NOTE: this connection is stereo.
2. Battery Compartment
Insert batteries here for portable use. We recommend using rechargeable (NiMH)
or Alkaline batteries in your SUPER FLY Active Cabinet to get the most out of using
it on the go.
NOTE: 8 x AA batteries (rechargeable recommended).
3. DC Input (PSU-2) / Battery Pack Input
Connect either external Blackstar power supply, or the Blackstar Rechargeable
Power Pack here.
NOTE: ONLY USE A BLACKSTAR APPROVED POWER SUPPLY (PSU-2).
4. Cabinet Link (rom SUPER FLY Bluetooth)
Connect your SUPER FLY Bluetooth here using this XLR input. Always use a good
quality screened cable.
5. Kensington Lock
Also known as a Kensington Security Slot or K-Slot, this is a specifically sized hole
for connecting a compatible Kensington Lock to secure the amplifier to a fixed
point. For more information please refer to www.kensington.com
Technical Specification
SUPER FLY Bluetooth
Power (RMS): 12 Watts
Weight (kg): 2.45
Dimensions (mm): 284 x 214.2 x 156.7
Batteries: 8 x AA batteries (rechargable recommended)
Speakers: 2 x 3" Speakers
SUPER FLY Active Cabinet
Power (RMS): 12 Watts
Weight (kg): 2.45
Dimensions (mm): 284 x 214.2 x 156.7
Batteries: 8 x AA batteries (rechargable recommended)
Speakers: 2 x 3" Speakers
13
Publicidad
