GB
Instructions
Opening pushchair
1
See images
-
Rear wheels
4
Snap rear wheel assembly onto
frame. Make sure brake levers are
pointing to rear of pushchair.
5
Wrap strap with snaps under brake
bar and insert into hole as shown.
6
Fasten snap.
Front wheels
7
Snap front wheel onto leg tubes as
shown. Repeat on other leg.
Hood
8
Attach hood onto connectors on
the sides of pushchair as shown.
9
Wrap hood around frame and
fasten tape.
10
To open or close hood.
To secure your child
11
See images
–
To adjust Use either shoulder har-
ness anchor in the slots that are
closest to child's shoulder height.
Use slide adjuster for further
adjustment.
To recline or raise backrest
17
Pull on tab to lower seat back.
18
Pull strap up to raise seat back.
3
16
To raise and lower legrest
19
Press buttons on side of seat to
20
lower legrest.
21
Pull legrest up to raise or push in
buttons on side of seat to raise
legrest.
Brakes
22
Push down on lever to lock.
23
Push up on lever to unlock.
Swivel wheels
24
See images.
25
Fold pushchair
26
Rotate lever as shown.
27
Place finger under hook and pull
up on lever.
28
Push pushchair forward to fold.
29
Raincover (certain models only)
30
See
Boot (certain models only)
31
See
10