Safety Instructions - Bosch AVENAR panel Serie Guia De Instalacion

AVENAR panel series
1

Safety Instructions

Warning!
Live components and stripped cable! Risk of injury from electric
!
shock. The system must be current-free during connection
work.
Warning!
The power button must be used to switch off the device before
removing the power supply. It may not be disconnected from
!
power supply while system is running. The device may be
damaged if this procedure is violated. Not following this
procedure may result in loss of warranty. Refer to user guide
for further information.
Notice!
Installation must only be carried out by authorized specialist
personnel.
Notice!
Bosch Sicherheitssysteme GmbH uses Open Source Software.
For more information see: http://www.boschsecurity.com/oss
Information about the Open Source Software used in this
product can be found on: http://<IpAddressOfDevice>:56789
Notice!
Use the Panel Controller only with the PRS-0002-C Panel Rail
Short.
Use solely the 5-wire cable of the Panel Controller for
connection to the PRS-0002-C Panel Rail Short.
Notice!
Do not remove the security labels. This will void the warranty.
Bosch Sicherheitssysteme GmbH
Safety Instructions | en
2020.05 | 6.0 | F.01U.347.557
35