M e n u f u n c t i o n s
Radio
To listen to the radio on your phone, connect the compatible headset to the headset
connector on the bottom of the phone. The lead of the headset functions as the
radio antenna, so let it hang freely. The quality of the radio broadcast depends on the
radio station coverage in that particular area. To turn on the radio, select
Media
> Radio. The channel location number, the name of the radio channel (if you
have saved the channel), and the frequency of the radio channel are displayed. If you
have already saved radio channels, scroll and select a radio channel location 1 to 20.
Tune and save radio channels
When the radio is on, select
frequency in 0.05 MHz steps, or press and hold
Searching stops when a channel is found. To save a channel, select
Save channel. Enter the name of the channel, and select
Use the radio
When the radio is on, select
channel or select Options, and from the following options:
Turn
off—to turn off the radio
Volume—to set the volume of the radio
Channels—to view the channel list. Select
the channel.
Loudspeaker
(or Headset)—to listen to the radio using the loudspeaker (or headset).
Keep the headset connected to the phone. The lead of the headset functions as the
radio antenna.
Set
frequency—Enter the frequency of the radio channel that you want to listen
to. You can enter a frequency between 87.5 MHz and 108.0 MHz. To set the
frequency, select
Options
Voice recorder
You can record pieces of speech, sound, or an active call for up to 3 minutes. This
is useful when you want to record a name and phone number to write down later.
The recorder cannot be used when a data call or GPRS connection is active.
Recording
1. Select
Menu
>
Media
2. To start the recording, select Record. To start the recording during a call,
select
Options
> Record. While recording a call, all parties to the call hear a
faint beeping sound about every 5 seconds.
42
or
and press
or
to scroll to the previous or next saved
Options
> Accept.
>
Voice
recorder.
Select
to change the radio
Select
to start the channel search.
Options
> Accept.
to rename or to delete
Menu
>
Options
>