General Information; About Your Device; Shared Memory; Access Codes - Nokia 7380 Manual Del Usuario

General information

■ About your device

The wireless device described in this guide is approved for use on the EGSM 900
and GSM 1800/1900 networks. Contact your service provider for more information
about networks.
When using the features in this device, obey all laws and respect the privacy and
legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.

Shared memory

The following features in this device may share memory: contacts, messages, voice
commands and SMS distribution lists, calendar and to-do notes. Use of one or more
of these features may reduce the memory available for the remaining features
sharing memory. For example, saving many multimedia messages may use all of the
available memory. Your device may display a message that the memory is full when
you try to use a shared memory feature. In this case, delete some of the information
or entries stored in the shared memory features before continuing. Some of the
features, such as images, gallery tones, and text messages may have a certain amount
of memory allotted to them in addition to the memory shared with other features.
Gallery files share a different memory. For further information, see "Gallery," p. 39.

■ Access codes

• Security code (5–10 digits): The security code helps to protect your phone
against unauthorized use. The code is supplied with your phone. The preset
code is 12345. To change the code and to set the phone to request it, see
"Security," p. 38.
• PIN code (4–8 digits): The PIN (personal identification number) code helps
to protect the SIM card against unauthorized use. It may be supplied with the
SIM card. If you activate the
settings menu, the code is requested each time the phone is switched on.
• PIN2 code (4–8 digits): This code may be supplied with the SIM card and is
required to access some functions, such as call counters.
G e n e r a l i n f o r m a t i o n
PIN code request function in the Security
7