Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
Cause/Solution
Light does not come ON
No power to the fixture.
with motion at night.
• Check if circuit breaker tripped.
• Confirm wall switch is ON.
Surrounding external ambient light is too bright. (If so,
the unit may think it is daytime.)
• Re-aim the head.
• Relocate or reposition the unit away from the light.
TURN OFF POWER BEFORE CONTINUING
Wiring to the unit is loose.
• Check wiring; reconnect if necessary.
Light stays ON full
There is motion in the detection zone.
brightness at night and
• Make sure the sensor is not picking up moving objects
does not turn OFF or DIM.
such as trees, traffic, animals, etc.
TEST FOR YOURSELF.
• Cover the sensor lens with cardboard to prevent sensor
from detecting motion. If the light stays off, something
in the detection zone is triggering the sensor.
* If the light stays on with the sensor lens covered,
contact customer service.
• Reposition the sensor.
Light continuously blinks
The light given from the unit's own lamp is affecting the
ON and OFF at night.
motion sensor.
• Re-aim the lamp.
• Reposition motion sensor.
Light is ON during the
The controls on the bottom of the motion sensor are in
day.
"TEST" mode.
• Change dial setting (not "TEST" mode).
The motion detector is shadowed.
• Reposition motion sensor.
Cannot activate Dusk to
Surrounding external ambient light is too bright. (If so,
Dawn Setting at night
the unit may think it is daytime.)
(override mode).
• Re-aim the head.
• Relocate or reposition the unit away from the light.
Not enough time is allowed for the fixture to enter the
"Dusk to Dawn Setting."
• Turn power OFF and ON twice within 3 seconds.
There is more than one fixture on an indoor wall switch.
• If so, put them on separate switches.
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: Security Gen 3 Light
Responsible Party – U.S. Contact Information
Cooper Lighting Solutions
1121 Highway 74 S
Peachtree City, GA
30269
www.cooperindustries.com/content/public/en/lighting.html
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Cooper Lighting Solutions warrants to customers that, for a period of five years from the date
of purchase, Cooper Lighting Solutions products will be free from defects in materials and
workmanship. The obligation of Cooper Lighting Solutions under this warranty is expressly
limited to the provision of replacement products. This
warranty is extended only to the original purchaser of the product. A purchaser's receipt or
other proof of date of original purchase acceptable to Cooper Lighting Solutions. This is re-
quired before warranty performance shall be rendered. This warranty does not apply to Coo-
per Lighting Solutions products that have been altered or repaired that have been subjected
to neglect, abuse, misuse or accident (including shipping damages). This warranty does not
apply to products not manufactured by Cooper Lighting Solutions which have been supplied,
installed, and/or used in conjunction with Cooper Lighting Solutions products. Damage to the
product caused by replacement bulbs or corrosion or discoloration of brass components are
not covered by this warranty.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL COOPER LIGHTING SOLUTIONS BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION,
WHETHER IN CONTRACT, STRICT LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR
FOR LOST PROFITS; NOR SHALL THE LIABILITY OF COOPER LIGHTING SOLUTIONS FOR ANY
CLAIMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE MANU-
FACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF COOPER
LIGHTING SOLUTIONS PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS THEREFORE,
EXCEED THE PURCHASE PRICE OF COOPER LIGHTING SOLUTION PRODUCTS GIVING RISE
TO A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED TO REMOVE OR INSTALL FIXTURES.
To obtain warranty service, please contact Cooper Lighting Solutions, at 1-800-334-6871,
press option 2 for Customer Service, or via e-mail ConsumerProducts@cooperlighting.com
and include the following information:
• Name, address and telephone number
• Date and place of purchase
• Catalog and quantity purchase
• Detailed description of problem
All returned products must be accompanied by a Return Goods Authorization Number issued
by the Company and must be returned freight prepaid. Any product received without a Return
Goods Authorization Number from the Company will be refused. Cooper Lighting Solutions is
not responsible for merchandise damaged in transit. Repaired or replaced products shall be
subject to the terms of this warranty and are inspected when packed. Evident or concealed
damage that is made in transit should be reported at once to the carrier making the delivery
and a claim filed with them.
Reproductions of this document without prior written approval of Cooper Lighting Solutions are strictly prohibited.
For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@cooperlighting.com
Printed in China
FRENCH
ARTICLES REQUIS:
(à acheter séparément)
• Tournevis cruciforme
• Calfeutrage en silicone étanche pour l'extérieur
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
Des précautions de base doivent être suivies lors de l'utilisation de ce produit, incluant :
• Le respect de tous les avertissements incluant les avertissements ci-dessous ET ceux
indiqués sur le produit.
• Conservez ces instructions et ces avertissements.
• Exclusivement réservé à un usage extérieur.
• Homologation cULus pour l'utilisation dans des endroits humides.
• Le démontage de l'appareil annule la garantie.
• L'appareil est câblé et assemblé à l'avance pour faciliter son installation.
AVERTISSEMENT
• Lisez et suivez ces instructions.
• Risque d'incendie ou de décharge électrique. Si vous n'êtes pas qualifié, consultez un
électricien.
• Coupez l'alimentation électrique depuis le fusible ou le disjoncteur avant l'installation
ou l'entretien.
MISE EN GARDE
• Raccordez le luminaire à une source d'alimentation de 120 V, 60 Hz. Tout autre
raccordement annule la garantie.
• L'appareil d'éclairage doit être installé par des personnes ayant l'expérience du
câblage domestique ou par un électricien qualifié. Le système électrique et la méthode
de raccordement électrique de l'appareil d'éclairage doivent être conformes au Code
national de l'électricité et aux codes locaux du bâtiment.
• Raccordez le luminaire à une boite de jonction encastrée et mise à la terre classique,
marquée pour une utilisation dans des endroits humides.
• Convient uniquement à l'installation sur un mur ou un avant-toit. NE convient PAS à
une installation au sol.
3
Publicidad
