Care And Cleaning - LUND Rampage 8854 Instrucciones De Instalación

6
Select the Driver/left Sidebar. Carefully
position the Sidebar onto the (3) Mounting
Brackets. IMPORTANT: Do not slide or rotate
the Side bar on the Brackets or damage to
the finish on the Side bar may result. Attach
the Side bar to the Mounting Brackets with (6)
8mm x 25mm Combination Hex Bolts. See
Figure 9. Do not tighten hardware. NOTE:
Mounting cradles on Brackets should be inline
and pointing toward the rear of the vehicle for
proper installation. Snug all hardware but do
not tighten.
7
Level and adjust side bar. Tighten all
hardware.
8
Repeat all steps for right side.

Care and Cleaning

• Rampage products are built to last; any detergent you use to wash your vehicle is sufficient to clean the
bumper. Do not use any harsh abrasive detergents. Periodically check and lubricate moving parts.
Congratulations!
You have purchased one of the many quality Rampage branded products offered by Lund International. We take the
utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made every
effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
The material that your product is made from can
be recycled. Please also consider recycling the
packaging that your product came in.
800-328-2409
• Visit us at Rampageproducts.com
© 2018 Lund Motion Products, Inc. All rights reserved.
Rampage Products™ is a trademark of Lund Motion Products, Inc.
Page 4 of 4
Figure 9
8mm Combo Bolts