LUND 84195 Instrucciones De Instalación

Care and Cleaning
To keep your LUND® Grille looking its best we recommend using only mild soap,
water and soft cotton cloth to wash (and dry). Harsh cleaning agents or cloths may
scratch or dull your grille.
Should your grille become scratched or dull you may use high quality, commercially-
available, non-abrasive polish recommended specifically for your grille's metal type.
If you have questions or concerns on the care of your LUND® grille, please call
800-328-5863.
Congratulations!
You have purchased one of many quality Lund® branded products offered by Lund
International, Inc. We take the utmost pride in our products and want you to enjoy
years of satisfaction from your investment. We have made every effort to ensure that
your product is top quality in terms of fit, durability, finish and ease of installation.
Lund International, Lund Accessories Division
Phone 800-328-5863 • Fax 800-782-5448 • Visit us at lundinternational.com
© 2007 Lund International, Inc. All rights reserved.
Lund® and the Lund® logo are trademarks of Lund International, Inc.
300 Horizon Drive
Suwanee, GA 30024
Page 4 of 4
Installation Instructions
Original Bar Grille
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-5863.
Important Safety Information
To avoid risk of personal injury or property damage:
• Wear safety glasses and gloves while installing billet inserts.
!
• Use caution when working with any power tools.
• Check clearance on vehicle.
CAUTION • Make sure that the billet inserts are secured in place and clears
PRECAUCIÓN
all moving parts of the vehicle.
ATTENTION
• Routinely check security of hardware.
• Do not use automatic "brush-style" car washes.
Contents
Illustrations may vary upon application
A
Billet Grille
E
B
Top Mounting
Bracket (3)
Tools Required
Safety Glasses
and Gloves
Shipping Note
Sometimes the billet products get bent in the shipping
process. You may need to hand bend them to attain the
desired shape.
Part Number 84195
C
6 - 5/16 x 1-1/2"
Washers
F
6 - 10/32
D
Kep Nuts
Bottom Mounting
Bracket (3)
Flat Head Ratchet with
Screwdriver 3/8 Socket
Caution
Grille covers may reduce airflow which may result in higher
operating temperatures. Monitor your vehicle's operating
temperature to ensure proper operating conditions.
Page 1 of 4
I-sheet Rev. A1