Worx WX253 Manual Original página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
just turn the Chuck clockwise or counter-clockwise a
little bit and try again.
3. SWITCH LOCK
The On/off Switch can be locked in the OFF position. This
helps to reduce the possibility of accidental starting when
the screwdriver is not in use. To lock the On/off Switch,
place the Forward/Reverse Rotation Control in the center
position.
4. FORWARD/REVERSE ROTATION CONTROL (See
Fig. E1, E2)
For drilling and screw driving in a clockwise rotation,
move the switch mark "
rotation, move the switch mark "
WARNING: Never change the direction of
rotation when the Chuck is rotating, wait
until it has stopped!
5. FULLY AUTOMATIC SPINDLE LOCKING (AUTO-
LOCK) (See Fig. F)
The screwdriver Chuck (6) is locked when the On/Off
Switch (4) is not pressed.
This allows the driver to be used manually when needed.
IMPORTANT:
When using as a manual tool, do not press the On/Off
Switch (4). Otherwise the screwdriver will be damaged.
6. USING THE LED LIGHT
To turn on the light simply press the On/Off Switch. When
you release the On/Off Switch, the light will be off.
LED light increases visibility and is great for dark or
enclosed area.
" lever to the left. For reverse
" lever to the right).
7. PROTECTION AGAINST DEEP DISCHARGING
The Li-Ion battery is protected against deep discharging
by the "Discharging Protection System" . When the battery
is empty, the machine is switched off by means of a
protective circuit: The chuck no longer rotates. When this
occurs you need to recharge the battery.
MAINTENANCE
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth. Always store
your power tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation
slots. This is normal and will not damage your power tool.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities or
retailer for recycling advice.
13

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wx253.1Qbit wx253Qbit wx253.i

Tabla de contenido