Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR
TOOL
When using the power tool in a situation
1.
where a fastener may contact hidden wiring.
Ensure that you hold the power tool by the
soft grip insulated handle surfaces only.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2.
Battery leakage may occur under extreme usage or
temperature conditions. If battery fluid comes into
contact with skin, wash with soap and water and
rinse with lemon juice and vinegar. If the fluid comes
into contact with the eyes, flush with water for
several minutes and contact a doctor immediately.
3.
Never burn batteries, they can explode in a fire.
4.
Do not charge a leaking battery.
5.
Use of an attachment and charger not recommended
or sold by the screwdriver manufacturer may result
in a risk of fire, electric shock, or injury to persons.
6.
Before screwing into a wall, check with a metal-/
voltage detector that if you are not sure whether or
not breaking into an electricity, gas or water supply
lines.
7.
Before you lay down the Screwdriver, make sure
that all moving parts have come to a stop.
8.
Avoid frequent stalling when screwing or drilling, as
this could damage the batteries.
9.
Only connect the charging device to an AC supply.
10. Charge Screwdriver battery only with the
appropriate charging device.
11. The charging device and the Screwdriver must be
protected from moisture!
12. Do not use the charging device outdoors.
13. Do not store or use the tool and battery pack in
locations where the temperature may reach or
exceed 39°C. (Such as outside sheds or metal
building in summer).
14. Always charge the battery pack between
temperatures 2°C to 30°C. Ideal charging
temperature is 18°C to 29°C .
15. Do not short out the contacts of battery or charger.
16. Respect the polarity "+/-" when charging.

SAFETY INSTRUCTIONS

WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
-
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
-
Children should be supervised to ensure that they do
not play with the appliance.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wx253.1Qbit wx253Qbit wx253.i

Tabla de contenido