Tool Specifications; Product Features - Würth KGS 250-60 Traducción Del Manual De Instrucciones De Servicio Original

 Check periodically that the motor air slots are clean
and free of chips.
Please be aware of the following factors influencing
exposure to noise:
• use saw blades designed to reduce the emitted
noise;
• use only well sharpened saw blades;
 Machine maintenance shall be conducted periodi-
cally.
Cross cut mitre saw
Article number
Rated power input
No-load speed
Dimensions of the saw blade
– Outer diameter
– Bore size
Mitre (left and right)
Bevel cut (left)
Double mitre cut
– Mitre cut
– Bevel cut
Max. sawing capacity
– Straight cut 90°
– Mitre cut 45°
– Mitre cut 48°
– Bevel cut 45°
– Bevel cut 48°
Weight
Class of protection

Product Features

1 On/Off switch
2 Handle
3 Lever for locking the handle
4 Fixed upper blade guard
5 Outer flange
6 Blade bolt
7 Lower blade guard
8 Saw blade
9 Lock for fence
10 Fixed saw table
11 Slotted plate
12 Mitre arm
 In case of an accident or machine failure, immedi-
ately turn the machine off and disconnect machine
from the power source.
 Report the failure and mark the machine in suitable
form to prevent other people from using the defec-
tive machine.
 When sawing plastic melting of the material is to be
avoided.
 Use only original Würth accessories.

Tool Specifications

13 Mitre clamping knob
14 Rotating table
15 Scale
16 Fence
17 Workpiece clamp
18 Lock bolt for saw-head guidance
19 Lock hook of guard
20 Lock lever for bevel angle
21 Scale for bevel angle
22 Holes for bench mounting
23 Locking knob for transport safety-lock
24 Guide rods
25 Saw head
26 Allen key
KGS 250-60
0701 343 0
1400 W
4600/4500 rpm
216 mm
30 mm
48°
48°
45°
45°
60 x 250 mm
60 x 170 mm
60 x 160 mm
48 x 250 mm
45 x 250 mm
11.5 kg
/ II
KGS 270-60 E
0701 344 0
1550/1400 W
2600 – 5200 rpm
216 mm
30 mm
50°
48°
45°
45°
60 x 270 mm
60 x 190 mm
60 x 180 mm
48 x 270 mm
45 x 270 mm
15.0 kg
/ II
20