Battery And Battery Charger; Tool Specifications; Machine Elements - Würth master HKS 28-A Instrucciones Para El Empleo

All manuals and user guides at all-guides.com
HKS 28 A - Buch Seite 15 Montag, 10. Dezember 2007 3:20 15

Battery and Battery Charger

The enclosed operating instructions for the battery
charger must be read carefully!
Under abusive conditions, liquid may be eject-
ed from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irri-
tation or burns.
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack.
Allow a heated battery to cool before charging.
Protect the battery from heat and fire:
Danger of explosion! Do not place the
battery on radiators or expose to strong
sun rays for a longer time; temperatures
over 50 °C cause damage.

Tool Specifications

Cordless Circular Saw
Article number
Rated voltage
No-load speed
Mounting bore of the saw blade 15,87 mm
Saw blade dia.
Max. cutting depth at 90°
Max. cutting depth at 45°
Weight (with battery)
Battery
Article number
Temperature control
Rated voltage
Capacity
Weight, approx.
For Your Safety
Do not open the battery, and protect it from im-
pact. Store in a dry and frost-free place.
When battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
For further notes on safety refer to enclosed
Sheet.
1 Locking screw for parallel guide
HKS 28-A
2 Locking screw for bevel-angle adjustment
0700 227 X
3 Auxiliary handle
28 V 4 Lock-off button
5 On/Off switch
4200 rpm
6 Handle
7 Battery
165 mm
8 Sawdust ejector/connection for dust extraction
54 mm 9 Lever of retracting blade guard
10 Base plate
39 mm
11 Parallel guide
4.3 kg
12 Retracting blade guard
Li-Ion
13 Saw blade
0700 956 730 14 Spindle lock button
15 Battery unlocking buttons
NTC
16 Battery charge-control indicator
28 V
17 Pushbutton
3.0 Ah
18 Lever for depth-of-cut adjustment
1.0 kg 19 Bevel-angle scale
20 Mark for 90° cuts
21 Mark for 45° cuts
22 Allen key (3/16")
23 Clamping flange
24 Fastening screw
25 Adjusting screw
26 Allen key (3/32")
Not all of the accessories illustrated or described are included
as standard delivery.
Do not dispose of
the battery in house-
hold waste or dis-
card into fire or wa-
ter.

Machine Elements

15