Dsp (Cdx-M700R Only); Setting The Equalizer; Selecting The Equalizer Curve; Adjusting The Equalizer Curve - Sony CDX-M700R Manual De Instrucciones

DSP
(CDX-M700R only)

Setting the equalizer

You can select an equalizer curve for five
music types (Rock, Vocal, Groove, Techno, and
Custom).
You can store and adjust the equalizer settings
for frequency and level.

Selecting the equalizer curve

1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (SOUND) repeatedly until "EQ"
appears.
3
Press < or , to select the desired
equalizer curve.
Rock y Vocal y Groove y Techno y
Custom y off
To cancel the equalizing effect, select "off."
After three seconds, the display returns to
the normal playback mode.
28

Adjusting the equalizer curve

1
Press (MENU).
2
Press M or m repeatedly until "EQ Tune"
appears.
3
Press (ENTER).
4
Press < or , to select the desired
equalizer curve.
Rock y Vocal y Groove y Techno y
Custom y off
5
Press (ENTER).
6
Press < or , to select the desired
frequency.
62 Hz y 157 Hz y 396 Hz y 1.0 kHz y
2.5 kHz y 6.3 kHz y 16.0 kHz
7
Press M or m to select the desired level.
The volume is adjustable by 1 dB steps
from –12 dB to +12 dB.
To restore the factory-set equalizer curve,
press (ENTER) for two seconds.
8
Press (MENU) twice.
When the effect setting is complete, the
normal playback mode appears.