After you select the desired item, the display
will automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the items are
scrolled in the display one by one in order.
Note
If you use personalised labels, they will always
take priority over the original CD TEXT
information when such information is
displayed.
Tip
The Motion Display mode can be turned off. (See
"Changing the sound and display settings" on
page 35).
Automatically scrolling a disc name
— Auto Scroll
If the disc name, artist name, or track name on
an MD or a CD TEXT disc exceeds 10
characters and the Auto Scroll function is on,
information automatically scrolls across the
display as follows:
• The disc name appears when the disc has
changed (if the disc name is selected as the
display item).
• The track name appears when the track has
changed (if the track name is selected as the
display item).
• The disc or track name appears depending on
the setting when you press (SOURCE) to select
an MD or CD TEXT disc.
If you press (DSPL/PTY) to change the display
item, the disc or track name of the CD TEXT
disc or MD is scrolled automatically whether
you set the function on or off.
1
During playback, press (MENU).
2
Press M or m repeatedly until "A.Scrl"
appears.
3
Press , to select "A.Scrl on."
4
Press (ENTER).
To cancel Auto Scroll, select "A.Scrl off" in
step 3.
Note
For some CD TEXT discs with very many characters,
the following cases may happen:
— Some of the characters are not displayed.
— Auto Scroll does not work.
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, press < or ,
momentarily for each track you want to
skip.
DISC
< (.) :
SEEK
To locate
SOURCE
preceding tracks
DISC
Locating a specific point in a track
— Manual Search
During playback, press and hold < or
,. Release when you have found the
desired point.
DISC
< (m) :
SEEK
To search
SOURCE
backward
DISC
Note
If "
" or "
display, you have reached the beginning or the
end of the disc and you cannot go any further.
Locating a disc
— Disc Selection
When an optional CD/MD unit is
connected, press M or m to select the
desired disc.
M (DISC +) : For succeeding discs
DISC
SEEK
SOURCE
DISC
m (DISC –) : For preceding discs
The desired disc in the current optional
CD/MD unit begins playback.
, (>) :
SEEK
To locate
succeeding
tracks
, (M) :
SEEK
To search
forward
" appears in the
SEEK
11