Technical Specifications - Nice TTDMS Instrucciones Y Advertencias De Instalación Y Uso

Before starting, turn on the lamp, set it to minimum brightness, and turn it off.
01. Hold down the button n on the transmitter; wait for the dimmer's led to flash
once green and the lamp to increase its brightness to the maximum. Now re-
lease the button.
02. Hold down the button t on the transmitter; wait for the dimmer's led to briefly
flash green 2 times and the lamp to decrease its brightness to 10%. Now release
the button.
03. Hold down the button s on the transmitter; wait for the dimmer's led to briefly
flash green 3 times and the lamp to increase its brightness to 50%. Now release
the button.
04. Hold down the button s on the transmitter; wait for the dimmer's led to briefly
flash green 4 times and the lamp to decrease its brightness to 10%. Now release
the button.
05. Select the desired option from the list:
• to lock the memory (= use button s);
• to unlock the memory (= use button n).
Now hold down the transmitter button indicated in the option in question; wait
for the led to flash green 2 times and turn off. Now release the button.
12.2 - Locking/unlocking the memory (using the dimmer's button)
01. Hold down the dimmer button until the green led turns on and off; release the
button.
02. Hold down the dimmer button until the led turns on green, turns off and then
flashes green 2 times; release the button.
03. Hold down the dimmer button until the led turns on green, turns off and then
flashes green 2 times; release the button.
04. Select the desired option from the list, then slowly press the dimmer's button the
corresponding number of times:
• to lock the memory (= 1 press);
• unlock the memory (= 2 presses).
Wait 10 seconds for the led to flash green the number of times indicated for the
selected option.
05. Hold down the dimmer's button; wait for the green led to turn on and off, then
release the button: the led will flash green briefly 2 times to confirm the deletion.
12.3 - Locking/unlocking the memory (using an external button)
Before starting, turn on the lamp, set it to minimum brightness, and turn it off.
01. Shut off power to the dimmer; hold down the external button, then power the
dimmer up again. Wait for the green led to turn on and the lamp to turn on at
9 – English
minimum brightness. Release the external button.
02. Hold down the external button; the green led turns on and then off again; the
lamp's brightness increases and then decreases; the green led and the lamp
flash 2 times. Release the external button.
03. Hold down the external button; the green led turns on and then off again; the
lamp's brightness increases and then decreases; the green led and the lamp
flash 2 times. Release the external button.
04. Press the external button the number of times corresponding to the option you
wish to program:
• to lock the memory (= 1 press);
• unlock the memory (= 2 presses).
10 seconds after the last press, the green led and the lamp flash the same num-
ber of times.
05. Press the external button and hold it down. The green led turns on and the
lamp's brightness increases; as soon as the led turns off and the lamp's bright-
ness has decreased again, release the button. As a confirmation, the green led
and lamp will flash 2 times.

13 - TECHNICAL SPECIFICATIONS

• Power input: 230 V AC, ±10% 50Hz • Maximum absorption: < 500mW in
standby, excluding load • Maximum load: 250W / 200VA • Dissipation: 2.5 W/A
(estimated) • Type of lamp (all with power supply 230 V AC ±10%, 50Hz): incan-
descent and halogen lamp; led lamp; neon lamp • IP rating: 20 • Dimensions: 47
x 18 x 32 mm • Weight: 30 g
14 - SCRAPPING
• As when installing the product, when the product reaches the end of its service life,
it must be scrapped by a qualified technician. • This product is made up of different
types of material, some of which can be recycled while others must be disposed of.
Seek information on the recycling and disposal systems available in your area for this
product category. Caution! – some parts of the product may contain pollutant or
hazardous substances which, if disposed of into the environment, may cause serious
damage to the environment or physical health. As indicated by the ad-
jacent symbol, it is strictly forbidden to dispose of this product together
with domestic waste. Therefore, implement separate waste collection
criteria for disposal according to the regulations in force in your area, or
return the product to the dealer when purchasing a new equivalent version. Caution!
– Local legislation may envisage serious fines in the event of abusive disposal of this
product. • The packing materials of the product must be disposed of in compliance
with local regulations.