Adjusting The Time - Baume & Mercier Clifton 65717 Manual Del Usuario

FULL CALENDAR WITH MOON PHASE
WARNING :
To avoid the risk of jamming the corrector buttons or
damaging the movement, it is essential you not make any
adjustment (day, date, month and moon phase) between 3
p.m. and 1:00 a.m.
To manipulate the corrector buttons, use the small tool
provided in the watch case.
To set your watch, please perform these steps in the fol-
lowing order:

Adjusting the time

1) Pull the crown to Position 2, the second hand (C) will
stop moving.
2) Turn the crown to advance the hands (A, B) clockwise
until the date (E) and day (K) change (when the watch
indicates midnight).
3) Continue to turn the crown to set the hands to 3 a.m.
Setting the moon
4) Press the corrector button (C4), until the full moon ap-
pears in the center of the moon phase aperture (I).
5) Then press the corrector button (C4) as many times as
there are days passed since the last full moon (consult
a calendar).
Adjusting the date
17
6) Press the corrector button (C3), until the date hand (E)
is positioned on the 1.
Setting the month
7) Press the corrector button (C2) to advance the month
(M) until the desired month.
Setting the date
8) Press the corrector button (C3) to advance the date (E)
to the desired date.
Setting the day of the week
9) Press the corrector button (C1), to advance the day (K)
to the desired day.
Setting the time
10) Turn the crown to advance the hands (A, B) clockwise
and position them at the desired time.
11) When the start of the set time is announced (reference
clock, radio, etc.), reset the crown to Position 1.
For months with fewer than 31 days, it is necessar y to
change the date manually at the end of the month.
11