Troubleshooting
9.4
Moving the device
➤ Remove the contents.
➤ Tape down all the shelves.
➤ Turn the adjustable feet all the way in so that they are not damaged when
moving.
➤ Tape the door closed.
➤ Only carry the appliance in an upright position.
Avoid tipping the appliance.
Protect the exterior with a blanket or something similar.
10
Troubleshooting
If you are unable to solve a problem yourself, get in touch with customer
services (see address list overleaf)
Problem
Appliance does not work
Appliance is not cold
enough
42
Possible cause
Appliance is not connected to a
power supply
Appliance is switched off
Circuit breaker or fuse has blown Switch on circuit breaker or
Temperature is not set properly
The ambient temperature could
require a higher temperature
setting
Door was opened frequently
Door was not closed properly
Door is not hermetically-sealed
D 15, D 50, D 100
Remedy
Connect the appliance
Switch on the appliance
replace fuse
Check the set temperature
Set a higher temperature
Do not open the door more
often than necessary
Close door properly
Check the door seal and
clean or replace
EN