Information For Users - Italiana Camini IDROPOLIS Instalación Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 80
REMOTE CONTROL code 633280 (optional)
: ignition / shutdown button
+
: button to increase the power/operating temperature
(when inside a menu, it increases the displayed varia
ble)
-
: button to increase the power/operating temperature
(when inside a menu, it decreases the displayed varia
ble)
A
: button to toggle from manual and automatic mode
M
: button to toggle from automatic to manual mode
- the remote control transmits by means of an infrared signal
within a range of 4-5 metres. The LED transmission signal
must be in line with the receiving LED of the stove for the
signal to be transmitted correctly. This must also be in a free-
fi eld environment, therefore, free of obstacles.
- the remote control works with 3 alkaline 1.5V AAA batteri-
es. Their duration depends upon usage, however, the average
duration is that of an entire season.
- when a button is pressed, the backlight goes on, which
indicates that the remote control is transmitting the signal. The
"beep" emitted by the stove confi rms its reception.
- the remote control must be cleaned with a damp cloth and no
detergents or liquids must be sprayed onto it. In any case, use
neutral detergents which are free from aggressive substances.
- handle the remote control with care. It could easily break if
dropped, due to its size.
Moreover, all operations implemented from the synoptic panel
can also be implemented from the remote control.
- The operating temperature is: 0-40°C
- The correct storage temperature is :-10/+50°C
- Operating humidity is: 20-90% R.H with no condensation
- Degree of protection is: IP 40
- Weight of remote control with batteries: 160gr
In accordance with Art. 13 of the Legislative Decree No. 151, dated 25 July 2005, "Implementation of Directives: 2002/95/
EC, 2002/96/EC and 2003/108/EC, pertaining to the reduction of hazardous substances used in electrical and electronic
equipment, as well as disposal of waste".
The crossed-out wheeled bin symbol shown on the equipment or on the packaging indicates that the product must be dispo-
sed of separately at the end of its useful life. Therefore, at the end of the equipment's useful life, the user must hand in the
equipment to suitable collection facilities for electrical and electronic waste, or return it to the retailer when a new, equiva-
lent appliance is purchased in a ratio of one to one.
INSTRUCTIONS FOR USE

INFORMATION FOR USERS

- 46
(Performed solely by the Dealer): An infrared remote con-
trol is easily identifi ed through radio transmission as it has
its transmission LED at the tip. Refer to photo "A" below.
-
Photo "A"

Publicidad

Tabla de contenido
loading

Tabla de contenido