Especificaciones De Instalación Instalación (Típica) De La Placa De Sujeción - RJG Lynx LES-B-127-50 Manual Del Producto

ESPECIFICACIONES DE INSTALACIÓN
Drawing Title: LES-B-127-XXX-02
INSTALACIÓN (TÍPICA) DE LA PLACA DE SUJECIÓN
**CLAMP PLATE INSTALLATION FOR PINS ≤ ⌀0.25 [7.0]; PINS >⌀0.25 [7.0] USE HEAD-TO-HEAD INSTALLATION ON SHEET LES-B-127-XXXX-04 & -05.**
A
NOTES:
1. CLAMP PLATE APPLICATIONS REQUIRE GUIDED EJECTION
2. EJECTOR AND TRANSFER PIN CONCENTRICITY MUST BE WITHIN
0.030" [0.76] OR 10% OF EJECTOR PIN DIA, WHICHEVER IS
SMALLER.
3. ENCLOSED EJECTOR BOX SUGGESTED.
4. DO NOT SCALE PRINT
5. BREAK ALL SHARP EDGES, 0.005 [0.03] R MAX
6. DIMENSIONS IN INCHES [MM], UNLESS NOTED
7. TOLERANCES UNLESS SPECIFIED:
XXX = ±0.003 [0.08]
XX = ±0.01 [0.3]
ANGLES = ±3 30°
10
Lynx™ Embedded Sensors (LES-B-127-XXXX) Installation—Clamp Plate Installation
SECTION A-A
SCALE 1 : 2.5
A
RJG, Inc.
3111 Park Drive
231-947-3111
Design:
www.rjginc.com
Sensores Integrados Lynx ™ LES‑B‑127‑50/125/500/2000 | Manual del Producto
Operator Side
Lynx™
Connector
Description: LES-B-127-XXXX
Sensor Installation
Drawn: K.J.Brettschneider
Check: M. Groleau
Date: 03.03.2021