Instalación De La Placa De Sujeción (Cabeza A Cabeza) - RJG Lynx LES-B-127-50 Manual Del Producto

ESPECIFICACIONES DE INSTALACIÓN (continuación)
INSTALACIÓN DE LA PLACA DE SUJECIÓN (CABEZA A CABEZA)
Drawing Title: LES-B-127-XXXX-04
G
SECTION G-G
SCALE 1 : 2.5
NOTES:
1. CLAMP PLATE APPLICATIONS REQUIRE GUIDED EJECTION
2. EJECTOR AND TRANSFER PIN CONCENTRICITY MUST BE WITHIN
0.030" [0.76] OR 10% OF EJECTOR PIN DIA, WHICHEVER IS
SMALLER.
3. ENCLOSED EJECTOR BOX SUGGESTED.
4. DO NOT SCALE PRINT
5. BREAK ALL SHARP EDGES, 0.005 [0.03] R MAX
14
6. DIMENSIONS IN INCHES [MM], UNLESS NOTED
7. TOLERANCES UNLESS SPECIFIED:
XXX = ±0.003 [0.08]
Lynx™ Embedded Sensors (LES-B-127-XXXX) Installation—Head-to-Head Installation
**CLAMP PLATE INSTALLATION FOR PINS ≤ ⌀0.25 [7.0]; PINS >⌀0.25 [7.0] USE HEAD-TO-HEAD INSTALLATION**
G
Description: LES-B-127-XXXX
RJG, Inc.
Sensor Installation
Sensores Integrados Lynx ™ LES‑B‑127‑50/125/500/2000 | Manual del Producto
3111 Park Drive
Drawn: K.J.Brettschneider
231-947-3111
Design:
Operator Side
Lynx™ Connector