HSM Powerline HDS 150 Manual De Instrucciones página 20

english
Checking the lid switch
• Open the lid.
After you close the lid, the display should go out
and you can start the machine again.
Checking the tray switch
• Pull the tray out.
After you have pushed the tray in, the dis-
play should go out and you can start the
machine again.
20
 The "Lid / tray open"
display should light up
and the LED should
fl ash red.
 The "Lid / tray open"
display should light
up and the LED should
fl ash red.
Powerline HDS 150
5 Operation
Switching the hard drive shredder on
• Turn the main switch to the
I position.

Hard drive
Hard drive or CD/DVD or magnetic tape
• If you want to process material of
the kind displayed again, press the
"Forward" button. Otherwise select
another kind of material (see Chap-
ter 6 "Menu settings").
that the shredder is not yet ready for opera-
tion. Do not add any more material.
 The kind of material
selected before switching
off the last time is shown
on the display panel:
 The shredding of the
data carrier is animated
schematically on the
display panel. But the
hand symbol indicates
 After a short time
the display changes.
The green LED on the
operator control panel
lights up. The machine
is now ready to operate.
Now you can add
material.
05/2016