Proper Use; Functional Description - HSM Powerline HDS 150 Manual De Instrucciones

• The operator must ensure that only staff
who have been given special instructions on
any dangers have access to the shredder
system. Maintenance staff must be qualifi ed
for the work to be carried out and have the
required expertise.
• Observe the local safety and accident pre-
vention regulations, including those for
environmental protection.
• Changes to the machine are strictly prohib-
ited. In particular, safety guards must not
be removed or disabled.
• Switch off the shredder, disconnect
the power plug and call customer
service in the following circumstances:
- Power cables or plugs are damaged.
- Liquid has entered the shredder.
- The machine does not work properly
despite the operating manual having
been observed.
- The shredder has been damaged.
05/2016
2 Description

2.1 Proper use

The hard drive shredder is designed for shred-
ding hard drives up to 3.5", CDs/DVDs, magnetic
tapes up to 3.5" and fl oppy disks.
2.2 Warranty
We provide a one year warranty for the hard
drive shredder. The warranty period is 6 months
when used in multiple shifts. This warranty
excludes wear, damage due to improper han-
dling, natural depreciation, and actions taken by
third parties. Our general business conditions
are applicable.

2.3 Functional description

After starting up the machine and selecting the
kind of material, the material for shredding is fed
into the infeed slot and discharged into the cutting
unit when the slide is pulled. Specially-hard-
ened solid steel shafts shred the data carriers.
The shredded material falls into a waste con-
tainer, the fi ll level of which is monitored. Once
the container is full, the machine is switched off
and the operator is informed on the display panel
that it is time to empty the container.
The operator control panel can be used to adjust
settings and view operating values.
Powerline HDS 150
english
15