Publicidad
Step 20
Apply the WARNING LABEL (4L) to the TOP (F). You should be able
å
to read the label when the TV is removed from the unit. When the
TV is in place, it should hide the label. Peel off the backing and apply
the label as shown in the diagram.
NOTE: This is a permanent label intended to last for the life of the
å
product. Once applied, do not try to remove it.
Push a CAM COVER (13P) onto each HIDDEN CAM.
å
Push the RUBBER SLEEVES (2R) over the METAL PINS (1R). Insert
å
the METAL PINS into the hole locations of your choice in the
ENDS (A and B) and UPRIGHTS (C, D, and E). Set the ADJUSTABLE
SHELVES (K and L) onto the METAL PINS.
NOTE: Please read the back pages of the instruction booklet for
å
important safety information.
This completes assembly. Clean with a damp cloth. Wipe dry.
å
And to celebrate, why not share your success story?
B
Page 24
4L
135 lbs.
25 lbs.
L
E
C
25 lbs.
K
420408
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV must weigh less than 135 lbs.
- The base of the TV must be able to sit
completely on this shelf.
F
25 lbs.
D
25 lbs.
L
75 lbs.
total
1R
2R
(16 used)
WARNING
A
K
(6 used)
13P
To cover HIDDEN CAMS
www.sauder.com/services
Publicidad
