Transport Notes; Packaging Notes For Customers; Use Of Crane Eyelets - TBH DF Serie Manual De Uso Y Mantenimiento Original

5. Transport Notes

The filter unit is delivered completely packed on a pallet, on which it can be safely further
transported. Transport must be carried out using a suitable transport means (forklift truck,
pallet truck, etc.). The packaging must not be loaded with any additional weight.
•
The packaging must not be exposed to environmental influences.
•
Transport and storage temperature: -25 to +55°C (max. 70°C / 24 h)
•
When loading, the center of gravity of the packaging unit must be observed.
5.1

Packaging Notes for Customers

When transporting on without original packaging or with modified original packaging, it must
be ensured that the system is optimally secured and protected against damage. The
corresponding safety regulations must be observed.
•
Before packing, make sure that the modules of the systems fit exactly on top of each
other and are tensioned hand-tight.
•
Place the system upright on a suitable pallet.
•
Make sure the system stands securely on the pallet. The use of spacer blocks to
keep the wheels of the system aloft is recommended. Also ensure that no moisture or
objects can damage the system from below.
•
Firstly, secure the modules against slipping among each other, e.g. using corner
profiles made of cardboard and tensioning straps.
•
Then, use suitable cushioning material and a firm outer packaging, e.g. sturdy
cardboard. The minimum pad thickness should be 2.5 cm. When the system has
been repacked, make sure that it is tightly seated in the new packaging.
•
Securely strap/tension the system components on the pallet.
•
It is mandatory to label the pallet as follows ("do not transport horizontally", "no further
loading from above", etc.).
The system may not be transported being laid down (only upright), as
this can cause damage to housings, filters and motors.
5.2

Use of Crane Eyelets

The following points must be observed when using the crane-eyelet attachments:
•
Use only the provided TBH crane eyelets!
•
The fastening of the load must take place as described in the quick reference guide
supplied with the crane eyelets.
Warning! It is mandatory to observe the safety instructions in the quick
reference guide enclosed with the TBH crane eyelets.
71
Vers. 2005