Automatic Function - Centrometal SLIM 6 Manual Del Usuario

Change the temperature
You can change
temperature using the keys
(1) and (2). The
temperature range
from a min. value of 7°C to
a max. value of 40°C.
Once you have chosen the
wished temperature, confi rm
your selection pressing the
key (3).
Change the power
Use the key (1)to select
the power of the stove. The
marks (2) on the display of
the remote control indicate
the fi ve possible powers.
Press the key SEND (3) to
confi rm your selection. You
will see the words on1-on2-
on3-on4-on5 and the room
temperature on the control
board of the stove according
to the selected power.
You can also select the
automatic function. Please
refer to the paragraph on the
Automatic Power Function
to understand how the stove
works in this mode.
Automatic power
function
To enter this function, press
the key (1), until you
see the symbol
display. Press SEND (2) to
transmit your selection. You
will read the word "Auto"
and the room temperature
on the control board of the
stove.
When you select this mode,
the pcb will set the working
power automatically
according to the difference
in degrees between the set
temperature and the temperature identifi ed by the
sensor on the back of the stove.
Press , once more, select the wished power and
press SEND to go back to the usual functioning.
the
goes
on the
Function TURBO
This function
developed in the event you
need to heat your room quickly,
for example when you have just
switched the stove on. When
you choose this function, the
stove will work at its max. power
for a period of thirty minutes
and the temperature will be
automatically set at 30°C. After
thirty minutes (or earlier if you
1
give different selections from the
2
remote control), the stove will
3
restart working as it did before
you activated the turbo function.
Keep the key TURBO (1) pressed for at least two
seconds to activate this function. You will read the
word "TURBO" (2) on the display of the remote
control. Set temperature and working power will
disappear. Press SEND (3) to transmit the selection
to the pcb.
You will read the word "Turb" on the control board
2
on the upper part of the stove. This word will appear
together with the room temperature and working
power set before activating the function TURBO.
If you want to deactivate this function before thirty
minutes have passed, press the key TURBO (1) once
1
again for at least two seconds. The word TURBO on
the display of the remote control will disappear and
3
you will see the set temperature and power again.
Press the key SEND (3) to confi rm your selection.
Function ECONO
The function ECONO has been
developed to save money and
it is used when you want to
keep the temperature constant
in the room. This function lets
the stove decrease its working
power every 10 minutes until it
reaches the power 1.
Keep the key ECONO (1)
pressed for at least two seconds
to activate this function. You
will read the word "ECONO"
(2) on the display of the remote
control. Set temperature and
working power will disappear.
Press SEND (3) to transmit the selection to the pcb.
1
You will read the word "Econ" on the control board
on the upper part of the stove. This word will appear
2
together with the room temperature and working
power set before activating the function ECONO.
If you want to return to the standard function,
press the key ECONO (1) once again for at least
two seconds. The word ECONO on the display of
the remote control will disappear and you will see
the set temperature and power again. Press the key
SEND (3) to confi rm your selection.
has been
2
3
1
2
3
1
9