Klarstein VAN HELSING Manual De Instrucciones página 14

EN
14
bracket a "U" shape as shown in Fig 3-1 through Fig 3-5. (Make sure to
assemble the "U" shape bracket in the correct method as shown in Fig
3-4 NOTICE). Remember to place a washer before placing a nut. Secure
bolts with nuts. If it still doesn't fit your grill, remove Part Z from the
bracket and mount the motor on Part Y directly (Fig 3-6).
3. Slide rotisserie motor
over bracket. (Fig 4)
4. Assembly the two
sections of rotisserie
rod. Make sure the
two sections are
tightly secured to
avoid them turning
loose during use.
(Fig 5)
5. Place the rotisserie
prongs into the
rotisserie rod with
caution. (Fig 6)
6. Place the collar into
the rotisserie rod and
fix it on the support on
the spit rod bracket
that is put on the
grill. The rod will turn
smoothly. (Fig 7)