Aventics ED07 Instrucciones De Servicio página 15

AVENTICS | ED07 | R414001671–BAL–001–AE | English
Standards complied with
DIN EN 61010-1 "Safety requirements for electrical equipment for
measurement, control, and laboratory use – Part 1: General
Requirements"
DIN EN 61000-6-2 "Electromagnetic compatibility"
(interference immunity in industrial areas)
DIN EN 61000-6-4 "Electromagnetic compatibility"
(interference emission in industrial areas)
13 Accessories
Component
Angle plug M12, 5-pin, A-coded for X2M and X2A
Angled socket M12, 5-pin, A-coded for XPC and
X1S
Angle plug M12x1, series CN2, 5-pin, B-coded for
X2N
Flat subbase ED07 with D12 plug-in cartridge and
silencer
Mounting set, series ED07 (Sheet metal for
mounting of ED07 flat subbase (5610231002))
Single subbase ED07
Base plate, ED07 series (for stacking assembly)
End plate left, end plate right for base plate ED07
Gasket, series EDO7 (1 gasket and 4 screws
DIN 912 - M5x90)
Silencer, SI1 series for single subbase,
ED07 series (5610211052) and base plate for
stacking assembly, ED07 series (8985049932)
For ED07 pressure regulators with the pressure range 16/20°bar, you may
only use the single subbase, ED07 series (order no.:°5610211052).
Order number
1824484028
1824484029
1824484026
5610231002
5530010522
5610211052
8985049932
1825503145
R414001681
1827000002
14