Forward-Facing Installation With Vehicle Seat Belts - Graco MY RIDE 65 Manual Del Usuario

FORWARD-FACING INSTALLATION
WITH VEHICLE SEAT BELTS
WARNING
LATCH belts MUST be stored when
using vehicle seat belt to install child
restraint.
Store Rear Facing and Forward Facing
1
LATCH belt as shown. (fig. a).
Adjust car seat to upright position
Flip recline feet out for forward
facing use (fig. b).
Place forward-facing
2
3
4
5
6
(fig. c).
22
belt (fig. d).
installation (fig. e). Vehicle lap belt
MUST stay tight. If not secure, see
"Vehicle Seat Belts" pg. 38.
hardware (B) and tighten adjustment
page 47. Belt must lay flat and not be
twisted.
LATCH
(A) to anchor
(fig. f). If
LATCH