With Vehicle Seat Belts; Forward-Facing Installation With Vehicle Seat Belts - Graco Contender 65 El Manual Del Propietario

FORWARD-FACING INSTALLATION

WITH VEHICLE SEAT BELTS

WARNING
LATCH belt MUST be stored when
using vehicle seat belt to install child
restraint.
Please refer to p.44, "Vehicle Seat Belts"
to determine what type of vehicle seat
belt is in your vehicle.
1. Store LATCH
in FORWARD-FACING position (b).
2. Unhook tether from tether storage, see page 52.
3. Place forward-facing
4. Thread vehicle seat belt through
belt as shown (a). Recline flip foot must be
on vehicle seat.
a
forward-facing
26
b
c
openings and buckle belt (c).